Logo, Trademark, Symbol, Word, Text

 

 

 

 

 

 

 

Press Operator - Garlock Houston

Garlock

 

Press Operator - Garlock Houston

  • 495413
  • Houston, Texas, United States
  • Garlock
  • Operations
  • Full-Time/Regular

GARLOCK SEALING TECHNOLOGIES

POSITION DESCRIPTION

 

 

ESSENTIAL FUNCTIONS:

  • Operates a series of hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds.
  • Completes opening of press/mold by various manual means and closes partially by manual means and pushing control buttons.
  • Performs duties that include:
    • Sets up assigned press line for maximum efficiency and productivity.
    • Raises and lowers presses.
    • Proper barring of press platens.
    • Applies mold wash to cavities.
    • Inserts blanks in mold cavities by hand.
    • Loads board, pots or plates.
    • Covers molds and inserts into press.
    • Cures stock for prescribed length of time.
    • Removes finished molded pieces from mold cavities, tear trim and deposits in provided containers.
  • Uses care in loading molds to insure that rubber blanks are properly positioned.  Inspection responsibilities will become paramount throughout molding cycle.
  • Troubleshoots press as corrective action when defects occur with product.
  • Audits pre-molded blanks for defects and proper weights during initial start-up.
  • Informs Supervisor and/or Engineering of defective conditions concerning pre-molded blanks. Assists and suggests ways to correct defects.
  • Inspects finished molded pieces, this inspection will involve the use of some form of gauge(s).
  • Assures, then provides input to Supervision or Quality as to the following:
    • Proper data codes are in place.
    • Durometer checks are O.K.
    • Status on stock availability and mold conditions.
  • Provides input and production data for histogram/bell chart development.
  • Verifies mold cleaning correctness.
  • Predetermines pressures, cure times and temperatures on product masters when presses are in operation.  Employee will however, be alert to pressure changes, proper functioning of mechanical lubricating systems, temperature readings, bumps and pre-heat cycle so as to provide input and correct product masters if improprieties exist.
  • Performs various finishing operations (manual or machine) on molded rubber items and other miscellaneous items in order to prepare them for shipment.
  • Moves all finished work to proper center and records production.
  • Maintains equipment, cleans and lubricates machines, empties dust collectors and refuse containers, cleans screen trays and replenishes media as necessary.
  • Miscellaneous functions such as tear trimming and stacking of parts will be an essential duty of the operator. May assist in Finishing operation as directed.
  • Performs material handling as is necessary to complete work.
  • Assures than non- conforming products do not enter the manufacturing sequence.
  • Maintains all paperwork associated with the areas inventory, receipt and processing of product and related products.
  • Performs specific duties the include the checking of incoming products, transferring from tote pans to shipping containers, selection and forming of cartons, weigh counting products, visual inspection, sealing of cartons, and the marking of shipping and product data on carton.
  •  

     

    OTHER RESPONSIBILITIES:

  • Maintains stock tote pans or containers in neat and orderly fashion.
  • Adheres to all plant safety guidelines.
  • Keeps work area in 5S condition.
  • Performs other jobs as assigned by Supervisor.
  • The above statements are intended to describe general nature of work being performed by people assigned to this job.  They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel classified under this job title.

     

    JOB SPECIFICATIONS: Must have knowledge of quality control requirements related to the degreasing and spraying of product .

     

    POSTURE:                                                Standing, bending

    MAXIMUM WEIGHT TO BE LIFTED:     30 lbs. (anything over 30# requires two people or mechanical      device)

     

    FREQUENCY PER SHIFT:                      25%

    REPETITIVE MOTION TASKS:               Arm/shoulder movement when loading / unloading molds and using spray gun. lifting & lowering mold covers, pushing and pulling molds, bending.        

    DURATION OF SHIFT:                             80%              

    OTHER:                                                                          

    WORKING CONDITIONS:                       Heat, cold, dirt, dust, fumes, noise, bonding agents (chemicals) and seasonal variation with temperature

     

     

     

     

    Other People Viewed

    Sr. Engineering Manager- Product Development

    495440 Palmyra New York United States Palmyra, New York, United States, 14522 Garlock Engineering
    Directs and coordinates engineering resources with a strong focus on commercializing new products. Partner with Product Management, Sales, Marketing, and Customers to identify and solve market problems that are urgent, pervasive, and where custome...

    Machinist Lead

    495458 Wheat Ridge Colorado United States Wheat Ridge, Colorado, United States GPT Operations
    The 2nd Shift Lead Machinist is responsible for the supervision, scheduling, training, and oversight of the machining team.

    Production Planner - Klozure

    495451 Palmyra New York United States Palmyra, New York, United States, 14522 Garlock Operations
    JOB SUMMARY:  Achieves Supply Chain and Operational objectives by effectively managing materials, production schedules and systems.  Implements production plan while managing capacity constraints to achieve customer delivery and inventory goals.  

    Temporary Parts Fab/Fin: Rubber Products (1st, $21.23 per hour)

    495450 Palmyra New York United States Palmyra, New York, United States, 14522 Garlock Operations
    Are you looking to grow your career in the manufacturing industry? How about having a chance to work in an innovative, high tech interface and automation environment? If you answered YES, this is the job for you!

    R & D Engineer II

    495445 Columbia South Carolina United States Columbia, South Carolina, United States Technetics Group Engineering
    The Materials Research Engineer position will be responsible for the development and analysis of currently used and new materials for use in current products. This person will also be responsible for innovative development of these new materials a...

    EHS Manager/ Supervisor

    495454 Suzhou. Shanghai Jiangsu. Shanghai China Suzhou, Jiangsu, China. Shanghai, China Sealing Segment EH&S
    This role is responsible for providing strong leadership to drive strategic and technical improvements in and ensure compliance with regulatory requirements and company standards for all Site EHS programs in Sealing China.

    home_snippet.jpg

    GLOBAL PERFORMANCE: Nearly half of annual sales are generated in markets outside the U.S.

    As part of the recruitment and job application process, Enpro collects and processes personal data relating to job applicants in accordance with Enpro’s Privacy Policy, which can be found here:  https://www.enproindustries.com/privacy-policy/default.aspx  

    Apply Now

    Alert me about jobs like this

    Not You?

    We have emailed you a code to verify your identity. Please check your spam/junk folder if you don't receive the email in your inbox.

    Thank you