Logo, Trademark, Symbol, Word, Text

 

 

 

 

 

 

 

Press Operator/ Finisher - Rubber Products - 2nd shift $20.89/hr

Garlock

 

Press Operator/ Finisher - Rubber Products - 2nd shift $20.89/hr

  • 493141
  • Palmyra, New York, United States
  • Garlock
  • Operations
  • Full-Time/Regular

ESSENTIAL FUNCTIONS:

  • Operates a series of steam and/or converted hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds or a combination of rubber, fabric and/or metal blanks.
  • Completes opening of press/mold by various manual means and closes partially by manual means and pushing control buttons.
  • Performs duties that include:
    • Sets up assigned press line for maximum efficiency and productivity.
    • Raises and lowers presses.
    • Proper barring of press platens.
    • Applies mold wash to cavities.
    • Inserts blanks in mold cavities by hand.
    • Loads board, pots or plates.
    • Covers molds and inserts into press.
    • Cures stock for prescribed length of time.
    • Removes finished molded pieces from mold cavities, tear trim and deposits in provided containers.
  • Uses care in loading molds to ensure that metal or rubber blanks are properly positioned. Inspection responsibilities will become paramount throughout molding cycle.
  • Troubleshoots press as corrective action when defects occur with product.
  • Audits pre-molded blanks for defects and proper weights during initial start-up.
  • Informs Supervisor and/or Engineering of defective conditions concerning pre-molded blanks. Assists and suggests ways to correct defects.
  • Inspects finished molded pieces, this inspection will involve the use of some form of gauge(s).
  • Assures, then provides input to Supervision or Tech Aide as to the following:
    • Proper data codes are in place.
    • Durometer checks are O.K.
    • Status on stock availability and mold conditions.
  • Provides input and data for histogram/bell chart development.
  • Verifies mold wash correctness.
  • Predetermines pressures, cure times and temperatures on product masters when presses are in operation. Employee will however, be alert to pressure changes, proper functioning of mechanical lubricating systems, temperature readings, bumps and pre-heat cycle so as to provide input and correct product masters if improprieties exist.
  • Works with Supervision and Tech Aides to assure product master correctness, including trial runs, data gathering and verbal communication as to progress status.
  • Miscellaneous functions such as tear trimming and stacking of parts will still be an essential duty of operators.
  • Performs various finishing operations (manual or machine) on molded rubber items and other miscellaneous items in order to prepare them for shipment.
  • Operates Nitrogen deflasher in the removal of flash from molded rubber products.
  • Works closely with Engineering personnel in the development and establishment of standard operating data relative to new and/or experimental products.
  • Prepares and maintains data cards for all molds.
  • Sets controls for primary and secondary nitrogen blast cycles, media blast cycle, wheel speed controlling blast force of media, temperature control and overall cycle time.
  • Dumps products into automatic loader and starts automatic cycle.
  • Keeps check on AMP meter, speed indicator and cycle dials during run and upon completion of cycle, operates controls to remove product onto shaker unit and into tote pans.
  • Moves all finished work to proper center and records production.
  • Maintains equipment, cleans and lubricates machines, empties dust collectors and refuse containers, cleans screen trays and replenishes media as necessary.
  • Miscellaneous functions such as tear trimming and stacking of parts will be an essential duty of the operator. May assist in Finishing operation as directed.
  • Performs material handling as is necessary to complete work.
  • Assures than non- conforming products do not enter the manufacturing sequence.
  • Maintains all paperwork associated with the areas inventory, receipt and processing of product and related products.
  • Prepares molder rubber products and related items for shipment by packing them in cartons and suitable container.
  • Maintains customer order file and verifies the accuracy of all goods received for shipment
  • Performs specific duties the include the checking of incoming products, transferring from tote pans to shipping containers, selection and forming of cartons, weigh counting products, visual inspection, sealing of cartons, and the marking of shipping and product data on carton.
  • Color coding orders if required
  • Marks all orders as to quantities shipped, makes out part shipment papers when necessary, and keeps a log of all orders shipped
  • Performs all input necessary for the shipment of orders via computer

OTHER RESPONSIBILITIES:

  • Maintains stock tote pans or containers in neat and orderly fashion.
  • Adheres to all plant safety guidelines.
  • Keeps work area in 5S condition.
  • Performs other jobs as assigned by Supervisor.

The above statements are intended to describe general nature of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel classified under this job title.

COMPETENCIES:

JOB QUALIFICATIONS:

  • Must have knowledge of quality control requirements related to the degreasing and spraying of product

POSTURE:

  • Standing; bending

FREQUENCY PER SHIFT:

  • 25%

REPETITIVE MOTION TASKS:

  • Arm/shoulder movement when loading / unloading molds and using spray gun. lifting & lowering mold covers, pushing and pulling molds, bending

DURATION OF SHIFT:

  • 80%

OTHER:

WORKING CONDITIONS

  • Heat, cold, dirt, dust, fumes, noise, bonding agents (chemicals) and seasonal variation with temperature

PHYSICAL REQUIREMENTS:

Office and Manufacturing Floor Position: Ability to perform sedentary work, spending extended periods of time working with a computer. Physical effort may include stooping, kneeling, reaching, standing, walking, pushing, pulling, lifting, grasping, talking, hearing, and repetitive motions. Clarity of vision to see near and mid-range. Ability to lift and carry up to 30 lbs. 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Garlock values diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Other People Viewed

Full Time Shipping Material Coordinator (8:30am - 5 pm / Monday to Friday)

493224 Palmyra New York United States Palmyra, New York, United States, 14522 Garlock Operations
Do you have experience receiving, handling, distributing and storing in- direct and direct goods in the manufacturing industry? Do you have valid driver's license and a fork truck license? If you said YES to our questions, this position might be f...

AE Business Process Coordinator

493238 Charlotte North Carolina United States Charlotte, North Carolina, United States, 28209 GGB Engineering
Provides process support and coordination to the Applications Engineering department. Co-ordinates with other functions to ensure process connections and documentation.

Sales Development Representative

493232 Remote Remote Garlock Sales & Marketing
The sales development representative (SDR) is a powerful driver of strategic pipeline growth in partnership with sales and marketing to generate and qualify leads, and develop new and existing accounts. SDRs grow sales for their respective segment...

Business Analyst - ERP

493229 Boise Idaho United States Boise, Idaho, United States NxEdge Information Technology
NxEdge in Boise, ID has an exciting new opportunity for a Business Analyst to provide ongoing support its ERP system, Epicor. The ideal candidate would have experience in business analysis work on ERP systems, such as providing customer support,...

Press Operator - Houston, TX

493223 Houston Texas United States Houston, Texas, United States Garlock Operations
Operates a series of hydraulic presses in various molding operations consisting of long or short production runs of products made of various rubber compounds.

home_snippet.jpg

GLOBAL PERFORMANCE: Nearly half of annual sales are generated in markets outside the U.S.

Apply Now

Alert me about jobs like this

Not You?

We have emailed you a code to verify your identity

Thank you